Request a quote
Menu
Request a quote ↗

Fused mineral guide · Aug 18, 2026 · 2 min read

Brown Fused Alumina vs White Fused Alumina in Refractory Mixes

A chemistry-first comparison of purity, titanium, iron, density and available sizes for refractory aggregates and abrasives.

Brown Fused Alumina

Brown and white fused alumina are both hard electro-fused alumina materials, but their chemistry and application priorities are different. The right choice starts with the impurity limits that the refractory or abrasive formulation can accept, not with the colour of the grain.

Read the impurity profile first

Brown fused alumina is supplied as a tough aggregate with a base Al2O3 specification of 94.5% minimum, while white fused alumina is listed at 99% minimum. The brown grade allows higher TiO2 and iron than the white grade. That difference can be important when colour, high-purity chemistry or a low-iron matrix is part of the product specification.

Indicator Brown fused alumina White fused alumina
Al2O3 94.5% min 99% min
Fe2O3 0.3% max 0.1% max
SiO2 1.5% max 0.2% max
TiO2 3.5% max Not listed in the supplied base table
Density True density 3.85-3.90 g/cm3 Bulk density 3.5 g/cm3 min
Mohs hardness 9 min 9 min
Melting point 2050 C 2250 C

Choose the grain form that fits the job

Brown fused alumina is available in FEPA F grain and P grain sizes such as 8#-80#, 100#-150# and 180#-220#. The supplied P-grain table also specifies magnetic material limits. White fused alumina is offered in section sand sizes from 0-1 to 5-8 mm and in 200- or 325-mesh powder.

Use the size notation that your production team already controls. FEPA, mesh and millimetre ranges are not interchangeable labels; the supplier and buyer should agree on the sieve or particle-size method before approving a shipment.

  • Select brown fused alumina when the formulation allows its TiO2 and iron window and needs a robust aggregate range.
  • Select white fused alumina when a higher Al2O3 and lower Fe2O3 or SiO2 limit is required.
  • Confirm the exact size split, magnetic-material limit and packing format on the purchase order.

Validate the full mix, not only the grain

Aggregate purity is only one part of a refractory recipe. Binder, matrix alumina, fine powder, firing profile and service chemistry can change the result. Request a representative sample and compare the complete mix under the intended pressing, drying and firing conditions before making a permanent grade change.